Savoie & Haute-Savoie · Bathroom

Price of a fitted
wall-hung toilet.

A wall-hung toilet means four elements — a support frame, a concealed cistern, a flush plate and a pan fixed to the wall — and the work to house them. We have recorded what these items cost in our 2024-2026 quotes in Savoie and Haute-Savoie: €700 to €900 excl. VAT in most cases for the whole set, before casing and removal.

44
Projects in our quotes with a wall-hung toilet
700–900 €
excl. VAT for the whole set, most common case
112 cm
Height of the frame most often found in our quotes
10 %
VAT on renovating a home more than two years old

What the “wall-hung toilet” line of a quote covers

In our quotes, the wall-hung toilet almost always appears as a set. It includes a support frame 112 cm high, the metal frame that carries the pan and contains the cistern; a concealed cistern 12 cm thick; a flush plate; and the wall-hung pan with its seat, often rimless to make cleaning easier.

What the line does not always say is where the labour is. On 24 of our projects, the toilet is priced “supplied and fitted” on a single line. On 23 others, the equipment is priced as supply only, and its fitting is part of a plumbing lump sum covering all the sanitary fittings on one level: it is impossible to extract the share for the toilet alone. Some quotes combine the two from one floor to the next.

Before comparing two quotes, look at which side the fitting is on. A €700 “supply only” toilet and a €900 “supplied and fitted” toilet do not say the same thing.

Our prices, item by item

Each range below covers the most common case in our 2024-2026 quotes in Savoie and Haute-Savoie, rounded and excluding tax. The price including VAT is calculated at 10%, the rate for renovating a home completed more than two years ago.

ItemWhat the price includesPrice excl. VATPrice incl. VAT (10%)Projects surveyed
Complete wall-hung toiletSupport frame, concealed cistern, flush plate, pan and seat€700 to €900€770 to €99044
Wall-hung toilet supplied and fittedThe same set priced on a single line, fitting and connection included€700 to €1,000€770 to €1,10024
Casing the framePlasterboard box around the frame, partition reinforcement if necessary€250 to €650€275 to €71510
Removal of the old toiletRemoval of the pan, removal or reworking of the supply and drain€100 to €250€110 to €27512
Hand basinHand basin, mixer tap and waste, supply only€400 to €900€440 to €99023

The most expensive sets in our survey, around €1,200 excl. VAT, correspond to higher-range pans and plates, or to a line that already includes the connection to a drain that has to be reworked. Conversely, our quotes almost never fall below €650 excl. VAT for a complete set.

What pushes the bill up, or down

Keeping or moving the drain. The most economical case: the new toilet takes the place of the old one, and our plumbers connect to the existing drain. Moving the toilet means reaching the soil pipe with a continuous slope, in 100 mm diameter. Depending on the distance, it is necessary to run through a partition, raise the floor or cut through the slab to the floor below; this work then appears on a separate line.

The wall that receives the frame. A masonry wall carries the frame without difficulty. On a lightweight partition, a free-standing frame is fitted, which takes the load at floor level, and the framework of the partition is reinforced; several of our quotes include this reinforcement in the casing item.

Casing and finish. The frame has to disappear behind a plasterboard box, moisture-resistant in a wet room, then under tiling or paint. If you tile the section of wall behind the toilet, the tiling is priced per square metre on top: our guide to the price of laying tiles gives our ranges.

The hand basin. In a separate toilet, it is often added to the same job. It needs one more water supply and one more drain, to be prepared before closing the box: this is the right time to decide.

Fitting by our plumbers, in order

1. Shut off the water and remove the old toilet, then temporarily cap the drain to prevent odours rising during the work.

2. Adapt the drain and the cold water supply to the exact position of the future frame.

3. Fix the frame, to the wall or to the floor if it is free-standing, and adjust its height before final tightening.

4. Test the connections before closing up. A leak discovered after the tiling has been laid costs a whole box: this check is not to be skipped.

5. Build the box, treat the joints, then lay the tiling or paint.

6. Fix the pan on its studs, fit the flush plate and adjust the flushing mechanism.

The cistern mechanism remains accessible behind the flush plate: if the flush leaks or the filling does not stop, we work through this hatch without breaking anything.

Example: replacing a floor-standing toilet with a wall-hung one

Take the case we meet most often: a floor-standing toilet to be replaced in the same place, against a partition that has to be cased in. Adding up our ranges — removal (€100 to €250), wall-hung toilet supplied and fitted (€700 to €1,000) and casing box (€250 to €650) — gives €1,050 to €1,900 excl. VAT, i.e. €1,155 to €2,090 incl. VAT at 10%. With the most frequent values from our quotes, the total comes to around €1,300 excl. VAT.

This is a calculation made from our prices item by item, not the price of a particular project. It includes neither tiling, nor paint, nor moving the drain. If the toilet is part of a completely redone bathroom, our guide to bathroom renovation gives the overall budget.

Floor-standing toilet, macerator toilet: what our quotes allow us to say

Our quotes include very few floor-standing toilets (four projects) and only two macerator toilet lines: that is too few to publish an honest range, so we do not give one.

What we can say about the macerator: it is justified only when no gravity drainage is possible, for example in a basement below the level of the soil pipe. It needs its own electrical supply, which our quotes price with a dedicated socket fitted by our electricians.

VAT: 10% when fitted by us, 20% when supplied by you

In a home completed more than two years ago, a wall-hung toilet supplied and fitted by the company falls under 10% VAT, equipment included. A toilet that you buy yourself stays at 20%; only its fitting then benefits from the reduced rate. Since 1 March 2025, a mention on the quote or invoice replaces the former certificate.

Special cases (new-build home, commercial premises, mixed work) are detailed in our guide to VAT on renovation work.

Our projects around the lake

All projects →

Plumbing, plastering, tiling and painting: on our projects, every trade is carried out by our own teams. A few recent projects.

How we price your wall-hung toilet

An on-site survey, then a quote where the equipment, the fitting, the casing and the plumbing alterations can be read separately.

Survey of the existing building

Position of the soil pipe, nature of the wall, water supply: these decide the type of frame and the alterations.

Choice of equipment

Frame, pan and plate settled before the work, so that every dimension is known when the plumbing is done.

Plumbing

Our plumbers adapt the drain and the supply, fix the frame and test the connections before closing up.

Casing

Our plasterers build the box, in moisture-resistant boards in a wet room, with reinforcement if the partition is lightweight.

Finishes

Tiling or paint by our tilers and our painters, then fitting of the pan and the plate.

A clear quote

Equipment, fitting, casing, removal: each item on its own line, so you can compare without guessing.

Where we work

On-site survey and quotes drawn up from our offices in Aix-les-Bains and Annecy, across the two Savoie départements.

Frequently asked questions · Wall-hung toilet

How much does a fitted wall-hung toilet cost?
In our 2024-2026 quotes in Savoie and Haute-Savoie, the set made up of support frame, cistern, flush plate and pan most often falls between €700 and €900 excl. VAT (44 projects). When fitting is on the same line, allow €700 to €1,000 excl. VAT. Casing the frame (€250 to €650 excl. VAT) and removing the old toilet (€100 to €250 excl. VAT) are added depending on the case.
Can a wall-hung toilet be fixed to a plasterboard partition?
Yes, with a free-standing frame: it is the floor that takes the load, not the partition. We also reinforce the framework of the partition where the frame goes. On a masonry wall, the frame is fixed directly to the wall.
Does the drain need to be moved to switch to a wall-hung toilet?
Not if the new toilet stays where the old one was: our plumbers connect to the existing drain. If it changes position, the soil pipe has to be reached with a continuous slope, which may mean raising the floor or cutting through the slab. This is then a separate line on the quote.
How do you repair the cistern if it is hidden in the wall?
Through the opening of the flush plate. On the frames we fit, the mechanism comes out through this hatch, without touching the casing or the tiling.
What VAT applies to a wall-hung toilet?
10% in a home completed more than two years ago, when the company supplies and fits the equipment. If you buy it yourself, the equipment stays at 20% and only the fitting is at 10%. Since 1 March 2025, the certificate is no longer required: a simple mention on the quote or invoice is enough.
How much does it cost to switch from a floor-standing toilet to a wall-hung one?
Adding up our ranges (removal, toilet supplied and fitted, casing box), you arrive at €1,050 to €1,900 excl. VAT, around €1,300 excl. VAT in the most frequent case in our quotes. This is a calculation, excluding tiling, paint and moving the drain: we confirm it after a free visit.
A toilet to replace?

A readable quote,
line by line.

Free on-site survey and quote: you will see the equipment, the fitting, the casing and the plumbing alterations separately.